Mandrel Bend 2" (51mm) - 45 to 90 Degree

Mandrel Bend - Aluminium Alloy 2" (51mm) - 45 to 90 Degree

SPECIFICATIONS

Outside Diameter - 2" (51mm)

Wall Thickness - 1.8mm

Centre Line Radius - 1.5 x Diameter

Leg Length - 6"

Aluminium Alloy 6063 - Raw Finish

CNC Mandrel Bent

Suitable for Intake & Intercooler Pipes

AVAILABLE DEGREES

45 Degrees

90 Degrees

MATERIAL INFO
Aluminium Alloy 6063 is a medium strength heat treatable alloy with good corrosion resistance, weldability and responsiveness to anodising. Suitable for use in intake pipes and intercooler applications where superior surface finish is important.

Due to selling on multiple platforms, stock availability may not be accurate. Please contact us for stock level enquiries.
Image is for illustration purposes only, product may vary.

SKU	MB200-AA
Brand	Viper
Shipping Weight	0.9700kg
Shipping Width	0.250m
Shipping Height	0.050m
Shipping Length	0.250m
Shipping Cubic	0.003125000m3
Unit Of Measure	ea

Be The First To Review This Product!

Help other Performance Exhaust Nationwide p/l users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

SILICONE SEALANT - High Performance Grey RTV Sensor Safe 750F 85G Tube

XtrasealItem No: SIL-GR85

RRP ~~$11~~ $10

Related products

HOLDEN COMMODORE VT VX VU VY VZ V8 200 CELL CATS SUIT PACEMAKER EXTRACTORS

ViperItem No: PC-PH5367-200K

RRP ~~$545~~ $495

2.5" Cat Back Exhaust Ford Falcon FG FGX XR6 4.0L NA Sedan Front Muffler / Rear Tailpipe - Dual Out

ViperItem No: STV219-246DTP

RRP ~~$326~~ $296

Silent Rain Cap - Suits 1.75" (44mm) Exhaust Pipe Zinc Plated

ViperItem No: RC175

RRP ~~$15~~ $13

Mandrel Bend 3 1/2" (89mm) - 45 to 90 Degree - 304 STAINLESS Brushed 2 Options Available

ViperItem No: MB350-S304

From $69

TUBE - ALUMINISED 1.5" (38mm) x 1.6mm Wall x 1 Metre 3 Options Available

ViperItem No: AST150-P

From $16

TUBE - ALUMINISED 2" (51mm) x 1.6mm Wall x 1 Metre 3 Options Available

ViperItem No: AST200-P

From $21

TUBE - MILD STEEL - 3" (76mm) x 1.6mm Wall x 1 Metre 3 Options Available

ViperItem No: MST300-P

From $42

TUBE - MILD STEEL - 3.5" (89mm) x 1.6mm Wall x 1 Metre 3 Options Available

ViperItem No: MST350-P

From $46

TUBE - 304 STAINLESS 3.5" (89mm) x 1.5mm Wall x 950mm 3 Options Available

ViperItem No: SST350-304-P

From $67

Reducer Cone TAPERED - 3" (76mm) to 2.5" (63mm) x 4" Long 304 Stainless Steel - Brushed

ViperItem No: CR250300-304

RRP ~~$25~~ $22

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Performance Exhaust Nationwide’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Performance Exhaust Nationwide’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 11 Trade p[lace Vermont 3133. Our ABN is 88 163 223 612. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

Mandrel Bend 2" (51mm) - 45 to 90 Degree - ALUMINIUM ALLOY - Raw Finish

2 Options Available

Be The First To Review This Product!

We Also Recommend

You May Also Like

Related products

Description

Specifications

Reviews

Be The First To Review This Product!

We Also Recommend

You May Also Like

Related products

for news and special member-only offers and discounts

Terms & Conditions

Privacy Policy